GENERAL SALES AND SERVICE CONDITIONS
- I – INTRODUCTION
These general conditions establish the terms and conditions governing all sales or services performed by ERLAB DFS. By placing an order with ERLAB DFS, the client agrees to adhere to these conditions without reservation. No exception to these conditions will be deemed valid unless said exception has been approved in writing by ERLAB DFS. No other general sales conditions or conditions of a similar type may prevail over the present general sales and service conditions even if the former contains provisions to the contrary. In the event of a contradiction between the respective conditions of each party and in the absence of a resolution, the contradictory clauses shall be deemed null and void, without prejudice to the validity of the sales or service contract. The client is a professional and is exempt from the provisions of consumer law.
- II - ORDERING PROCESS
II – 1: device orders The order placed by the client must be confirmed by ERLAB DFS via an acknowledgement of receipt of order, otherwise the sales contract will be deemed invalid.In the event that the client introduces an error when creating the order or that product numbers, prices, or sales conditions are modified by ERLAB DFS, the order confirmation shall include the modifications required as a result of these errors or modifications. The client must verify the order confirmation issued by ERLAB DFS. Upon receipt of the order confirmation, the client may cancel the order within a period of eight days (for device orders) or 48 hours (for filter orders), provided that the order confirmation is not identical to the order originally placed by the client. No other request for modification or cancellation of an order will be accommodated. Without prejudice to the abovementioned provisions, any order confirmed by ERLAB DFS obliges the client to accept the delivery of the product or service ordered and to pay the agreed upon price.
II-2: service orders Yearly maintenance contracts may be executed between ERLAB DFS and its clients, with payment for services due at the beginning of the contractual term. If payment is not received at the beginning of the contractual term, the price will be increased by 10%. If a filter or part is found to be in need of replacement during a maintenance visit, the client must issue an adjustment order within seven days following the visit by the service provider's technician. II-3: order subject to prepayment Any order confirmation issued for an order subject to prepayment will be valid for a maximum of sixty days. If payment in full is not effected within the sixty days from the order confirmation date, ERLAB will be entitled to void the order.
- III – TRANSFER OF RISK
Risk is transferred to the client at the moment that the carrier delivers the goods to the client, except in the case that the client signs the shipping contract themselves and assumes any risks at the moment that the goods are transferred from ERLAB DFS to the carrier or to the client themselves.
- IV – PRICING AND PAYMENT
Our prices are given in Euros, excluding taxes and including charges for standard packaging; shipping and certain special packaging are added as separate charges. ERLAB DFS is obliged to honor only the most recent prices to date. The price list made available to clients is based on a maximum payment term of 60 days or 45 days end of the month from the date of invoice; An early payment discount may be granted according to the early payment discount schedule listed on the invoice. The client chooses the payment date and corresponding early payment discount rate in agreement with ERLAB DFS. In the event that the client does not strictly adhere to the selected payment date, an adjustment credit note based on the actual date on which full payment was received will be issued for the discount granted. For regular clients, payment terms shall be subject to a prior credit check, with a credit limit set for outstanding orders. Under no circumstances may the client impose their own payment terms or discounts. The accepted method of payment is that which is listed on the invoice. Failure to pay by the due date listed on the invoice shall result in the accrual of late fees equivalent to three times the French legal interest rate. Any order over ten thousand Euros shall require a 30% down payment.
- V - DELIVERY AND SERVICE LEAD TIMES
ERLAB DFS shall use the order confirmation to inform clients of the lead time for the delivery of any devices and filters ordered. ERLAB DFS shall make every effort to uphold these lead times; however, lead time information is provided as an estimate only, and under no circumstances may ERLAB DFS be held liable in the event of a late delivery. For service deliveries, the secretarial office of the Asura department shall contact the client in order to set a date, by mutual agreement, for the technician's maintenance visit. Asura makes every effort to adhere to the agreed upon date, but may not be held liable under any circumstances should the agreed upon date be modified for reasons outside the company’s control. If Asura’s technician arrives at the client’s facilities on the agreed upon date and time and is unable to perform the services required for reasons attributable to the client, the client will be invoiced for the technician’s travel expenses at the rate in force on the date of the service.
- VI - DELIVERY
The client must examine the goods upon receipt. The client is required to confirm that they are the intended recipient of the products delivered (verification of package labels), that there are no missing packages, and that the packages received are in good condition before the carrier leaves the premises. If a package is missing or if a package shows evidence of mishandling, the client is required to note these reservations on the bill of lading submitted by the carrier and to notify ERLAB DFS the same day. Any reservation noted in reference to evidence of mishandling must specify the type of evidence: packaging caved in, open, or punctured, pallet film wrap removed or pulled away, etc. The client must, except in the event that ERLAB DFS will be responsible for device commissioning, remove the devices from their packaging and install them as soon as possible to ensure that they conform to the order confirmation and that they lack any obvious defect or damage. The client must submit any reservations by registered letter with confirmation of receipt to ERLAB DFS no later than three days from the delivery date. If reservations were noted with the carrier when the goods were received and if, upon re-inspection, there is truly a package missing or items damaged, these reservations must be confirmed by registered letter with confirmation of receipt within three days from the delivery date sent to both the carrier and to ERLAB DFS. If the client fails to submit such reservations within a three-day period from the delivery date and in compliance with the abovementioned provisions, the following irrefutable assumption shall apply: it is assumed that the client has received the devices and that these devices conform to the order confirmation and are free from any obvious defect, or that the client has accepted said defects.
- VII – REFUSAL OF ACCEPTANCE OF GOODS
The client is prohibited from refusing to accept any product ordered except where either of the two following conditions applies: the product delivered fails to conform to the order confirmation or an obvious defect is found to affect the product ordered. In the event that the client refuses to accept an order, products may be stored at the client’s expense and risk.
- VIII - CONFORMANCE OF GOODS
The representation of any products available for purchase as depicted on any type of medium (web site, catalogues, etc.) is provided for illustrative purposes only; these representations are non-binding and have no contractual value. Modifications may be made to the devices available for sale; thus, non-conformance, as reported by the client, may only take account of the products’ capacity to fulfill the functions for which they were designed. If the client has a special need for a function or possible application of the device that cannot, objectively, be deemed essential, they must specify this need on their order so that the level of conformance expected can be guaranteed. A device having a product number different from that listed on the order confirmation is automatically considered to be non-conforming.
- IX – COMMISSIONING OF THE DEVICES
At the client’s request and depending on the country, ERLAB DFS is able to provide commissioning services for devices delivered. This service must be requested at the time that the order is placed for the device and shall be invoiced according to the price listed on the order confirmation as well as the invoice. The client must examine the goods upon receipt. The client is required to confirm that they are the intended recipient of the products delivered (verification of package labels), that there are no missing packages, and that the packages received are in good condition before the carrier leaves the premises. Any time that a package appears damaged or is missing, the client is required to note these concerns on the bill of lading submitted by the carrier and to notify ERLAB DFS the same day. Any reservation noted in reference to evidence of mishandling must specify the type of evidence: packaging caved in, open, or punctured, pallet film wrap removed or pulled away, etc. -If reservations were noted with the carrier when the goods were received and if, upon re-inspection, there is truly a package missing or items damaged, these reservations must be confirmed by registered letter with confirmation of receipt date sent to both the carrier and to ERLAB DFS within three days from the delivery. In the absence of any reservations submitted by the client at the time of the delivery and confirmed within the three days following delivery, the client may not report a missing package or any damage to items contained in a package that shows evidence of mishandling. -Provided that all packages are in good condition, the client may not unpack the goods and must ensure that they are properly stored until the arrival of the technicians in charge of commissioning the devices. The technicians responsible for the commissioning shall unpack the products, install the devices, and test them for proper functioning. After confirming that the goods conform to the order confirmation and checking for any obvious defects, the client may note any reservations on the documents submitted for this purpose by the technicians responsible for the commissioning of the devices. In the absence of any reservations, the client may not report any obvious defect or non-conformance at a later date.
-X- MAINTENANCE AND REPAIRS
At the client's request, ERLAB DFS is able to make visits, in France, to service all brands of recirculating fume cupboards and filtered air cabinets. An international network of companies specializing in the maintenance of the devices sold by ERLAB DFS, known as “Asura Authorized Licensees,” has been approved by ERLAB DFS. Upon request, ERLAB DFS is able to send a list of licensed companies to its clients. ERLAB DFS strongly recommends that its devices be commissioned and maintained either by ERLAB itself or by licensed Asura® companies. In the event that repair work is needed after an inspection has been performed, the following distinction applies: -For Captair® brand devices, ERLAB DFS agrees to perform all repairs and provide the required spare parts (if these parts are still in production or stock) and replacement filters, if necessary. -For other brands, ERLAB DFS may refuse to perform repairs if the device has any unusual characteristics; likewise, the company will not replace a used filter or spare part unless it is able to offer a filter or spare part that is suitable for the device. If justified, the client may note any reservations on the service report, which must be submitted to the client by the Asura technician.Regardless of whether or not any reservations have been reported in regard to the services performed, the client is required to sign the service report submitted by the Asura® technician on the same day in which the service is performed. Maintenance technicians may be called to collect used filters, but only after a statement has been issued regarding the ways in which the filter was used.
- XI - WARRANTY
The devices and spare parts are protected by a one-year warranty that takes effect on the day on which the sale is concluded between ERLAB DFS and their client or the date on which the spare part is installed. - In the event that the delivered product fails to conform to the order confirmation or has an obvious defect, as reported by the client upon delivery and/or within a period of three days and acknowledged by ERLAB DFS, the delivered products shall be replaced free of charge within a reasonable timeframe. - If, during the warranty period, a latent defect is discovered that renders the device unsuitable for its intended purpose, the client shall notify ERLAB DFS in a timely manner by telephone and by letter with acknowledgement of receipt. ERLAB DFS shall then either have the client return the defective device, in accordance with the conditions set forth by Article XIII, or repair the device at the client's facilities, with all expenses borne by ERLAB DFS. ERLAB DFS may decide to repair the device at the client’s facilities if this service will suffice to bring the device back into perfect working order within a reasonable timeframe from the date on which the letter reporting the discovery of said latent defect was received. For device returns, once the defect is acknowledged by ERLAB DFS, the latter will have the option, within a reasonable timeframe, of either delivering an equivalent product in exchange for the defective product or repairing the defective device. The warranty period shall be extended by a period of time equivalent to the number of days between the discovery of the defect and the replacement or repair of the device. The warranty offered by ERLAB DFS and set forth in the present clause precludes the client’s right to file any claim for damages and interest pertaining to non-conforming or defective goods.
- XI – WARRANTY EXCLUSIONS
Consumables are not covered by the warranty. Filters and Captair pyramids are covered by the warranty until they are used for the first time. Any damage to the device due to a lack of maintenance, poor installation, improper use, an outside event (e.g., electrical shock, impact, flooding), or normal wear is excluded from the warranty. Any service work on the devices, with the exception of initial installation, performed by the client or a third party not licensed by ERLAB DFS, automatically terminates the warranty set forth in Article XI. Any use of the device after the discovery of a defect affecting said device, prohibits the client from availing themselves of the present warranty.
- XIII – PRODUCT RETURN
Any device return will be subject to a prior approval in writing from ERLAB DFS. Once ERLAB DFS has given their approval, the client must return the device as soon as possible. Returned devices must be accompanied by a detailed explanation in which the client describes the applications performed in the device and the defect(s) justifying the return of the device. Only those defects reported by way of said document shall be repaired free of charge or be deemed grounds for a product exchange, also free of charge, insofar as these defects are covered by the warranty. If performance of the warranty involves returning the defective product to ERLAB DFS, any repair and shipping costs shall be borne by ERLAB DFS. However, the risk of theft, loss, or physical wear to the product during transport shall be borne by the client; therefore, the client is responsible for taking all measures necessary to protect the device during transport (adequate packaging materials). The device may not be returned to ERLAB, without its used filter(s), unless it has been completely decontaminated and a statement has been issued specifying the applications carried out within the device.
- XIV – RETENTION OF TITLE
Title to the device is transferred to the client on the date on which price is paid in full by the client, except in the event that the device is re-sold to a third party. In the event of damage to or loss of a device, the price of which has not been paid in full, ERLAB DFS shall be subrogated to the rights of the client with respect to the client’s insurer. If the device is re-sold to a third party, the rules of real subrogation (transfer of rights in exchange for the resale price) shall apply beginning on the anticipated payment date if payment has not been effected in full on this date. This provision shall not prevent the transfer of risks that occurs upon hand-over of the goods to the client or their carrier, in accordance with Article III.
- XV – LIABILITY & DISPUTES
In the event that ERLAB DFS is held contractually liable for breach or misfeasance of its obligations, the penalty thereby due may not exceed the value of the goods or services giving rise to the damages. Any dispute in relation to the present general sales conditions, whether said dispute pertains to their validity or to their application, shall be brought before the Tribunal de Commerce de Rouen (Rouen Commercial Court), unless the parties have decided by mutual agreement to bring their dispute before an arbitrator selected by the parties for this purpose.
PURCHASING AGREEMENT (USA only)
A Purchase Order Number or Credit Card in the form of US Dollars is required for all purchases. Each purchase order is subject to all of the following terms and conditions. Orders will not ship until a formal Purchase Order is received by email, US mail or fax. Purchase Orders are not cancelled without penalty. A 15% re-stocking fee, plus freight charges will be applied for all cancelled shipments.
Net 30 with receipt of a company Purchase Order. Interest shall be chargeable on any amounts overdue at the monthly rate of 10% (ten percent). The amount charged will be pro-rated according to the date that full payment is received. All new customers are required to provide three (3) credit references with the Purchase Order. Products will be shipped upon credit approval or when payment is received in full. Credit Cards and Wire Transfers (with applicable fees) are welcome. All prices provided are reflected from Erlab Inc’s most current published price list. The transfer of ownership is postponed until the date that full payment is received by Erlab Inc. Massachusetts Tax will be charged to all instate customers. Tax liability outside of Massachusetts is the responsibility of the purchasing company.
F.O.B. Rowley, MA / Shipping Point PPD and added to invoice, or Freight Collect. Free on board at point of origin. Under these terms the purchaser must pay all transportation and handling costs. The receiver must assume responsibility to inspect the merchandise for damage before accepting the shipment. If the shipment shows any signs of damage, it is the responsibility of the receiver to refuse the shipment, or have the carrier note the damage at the time of delivery on bill of lading.
Filter orders are shipped within 48 hours upon receipt of approved order. All other products are shipped within two (2) weeks for in stock items. *Orders are shipped by best means available. If a preferred carrier is desired, customer must specify on the Purchase Order.
A Limited Lifetime Warranty is valid on all Captair products with regards to mechanical parts as long as genuine Erlab parts and filters are used in compliance with the Captair Brand specifications. Consumable items (including filters) and Captair Pyramid remain under warranty only until the first use. Erlab Inc. is the Sole US Distributor of Captair products and is not responsible for damage that occurs as a result of failure to follow instructions that are included with the original product. This Limited Lifetime Warranty does not apply from the result of an accident, misuse, abuse, contamination, modification, normal wear and tear or other external causes. This section constitutes Client’s sole and exclusive remedy and Erlab Inc’s sole and exclusive responsibility with respect to any alleged breach of this limited warranty.
Captair Products are non returnable. All sales are final.